Fluid containing active forms of silver intended for washing and cleaning of air conditioners with contamination that is difficult to remove.
Available packaging
- 5 liters
- 1 liter
Product description:
Smart CleanAir Active is a modern, concentrated formula for washing and cleaning of dirty outdoor air conditioning systems, and thanks to the application of high-strength active foam, it effectively removes even the most resistant pollution. Effectively removes dirt, dust, sediments, pollution from petroleum derivatives and fats. The silver contained in the formula ensures long-term reduction of microbes. The formula is based on surfactants. Following the formula’s application, a high level of hygiene and purity is maintained in HVAC systems. It is safe for lacquered surfaces, plastics, metals, ceramics and aluminum. It does not contain caustic acids or bases, does not cause corrosion.
Dilution: Dissolve 1 L of the product in 4 L (preferably warm) distilled or demineralized water (20% aqueous solution).
If tap water is used, the formula’s properties may deteriorate. After mixing, the solution is ready to use.
- Product intended for washing and cleaning of air conditioners with heavy pollution that is difficult to remove.
- High-strength active foam.
- The unique formula has dual-phase power.
- Reduces the number of microorganisms.
- Formula based on surfactants – does not contain caustic acids and bases.
- Anti-static action – prevents re-accumulation of dust and dirt.
- Products do not cause corrosion.
- For professional use
Product applications:
- outdoor units
- cooling equipment
- industrial lines
- ventilation systems for gastronomy
- kitchen hoods
- evaporators
- heat pumps
How to use:
- Dissolve 1 L of the product in 4 L (preferably warm) distilled or demineralized water (20% aqueous solution).
- Remove solid contaminants mechanically.
- Spray the product uniformly over the entire cleaned surface from a distance of at least 15 cm, and leave the foam on the surface for about 5-10 minutes.
- Rinse off the remnants with water or remove with a sponge, brush or cloth. Repeat the process if necessary.
In order to maintain the proper operating parameters of equipment and air, service activities should be repeated no less frequently than once every 6 months. For a complete effect following washing, we recommend applying SMART CleanAir or SMART CleanAir Concentrate or SMART CleanAir+. Due to the presence of silver, we recommend carrying out a test on a small surface of the material to be cleaned in order to check for discoloration. Avoid exposing the product to light and electromagnetic fields.